Rules · Arches · Structure · Walls
In a row of arches the thrusts of neighbouring arches cancel over each intermediate pier, which may therefore be slender; at the ends of the row nothing balances them, so the outermost piers must be made wider or buttressed.
Vitruvius tells the builder of arcaded structures to make the outermost piers broader than the rest so that they can resist the wedges pushing outward. The Pont du Gard and every Roman aqueduct show the principle: slender piers in the run, massive abutments at the banks.
The same reasoning explains Gothic structure. Along the nave the thrusts of the arcade arches balance one another; across the nave nothing balances the push of the high vault, and it must be carried outside by flying buttresses.
In a bonded masonry wall the courses above an opening corbel over it of their own accord, so the lintel carries roughly the triangle of wall with sides rising at 60° from its ends; everything above that triangle arches onto the jambs.
load ≈ equilateral triangle on the span: W ≈ 0.43 · L² · t · ρ g
Build an arch of wedge-shaped stones (voussoirs) whose joints all point towards the centre of the curve: each stone can then fall only by forcing its neighbours apart, and so the ring holds itself up once the last stone, the keystone, is in place.
joints ⟂ intrados (radial to the centre)
An arch pushes outward on its supports as well as down. For the same load and span the horizontal push grows as the rise falls: halve the rise and you roughly double the thrust.
H ≈ w·s² ⁄ 8f (uniform load w per metre, span s, rise f)
A chain hanging freely takes the one shape in which it is in pure tension; turn that shape upside down and it is the shape of an arch in pure compression for the same loads.
free-hanging chain (catenary) ↔ ideal arch under its own weight
Trace the path of the resultant force through the stones from crown to foundations. If a line can be found that stays everywhere within the masonry, the arch will stand; where it touches an edge, a hinge will open, and four hinges make it collapse.
Draw a pointed arch from two centres on the springing line. With the centres at the springings, the arch is equilateral; with centres beyond them, a lancet; with centres between them, a drop arch. Late Gothic added arches of four centres and the reversed curve of the ogee.
r = s (equilateral) · r > s (lancet) · s⁄2 < r < s (drop)
Cite this page Chris Paton, “Make the end piers of an arcade the strongest”, The Textbook of Architecture, https://textbookofarchitecture.com/rule/arcade-end-piers. Text, drawings and models licensed under CC BY-NC 4.0.