Classify arches by the geometry of the intrados: the number and position of the centres (one for round and segmental, two for pointed, three or four for basket and Tudor arches), or a single continuous curve (ellipse, parabola, catenary), and distinguish true arches, with voussoirs, from corbelled “arches” of oversailing courses.
Round (semicircular) arches dominate Roman and Romanesque building; the horseshoe arch, continuing past the semicircle, is characteristic of Visigothic Spain and of Umayyad Córdoba; stilted arches raise a semicircle on vertical legs so that its crown matches a wider neighbour; three-centred “basket” arches suit wide, low openings.
A corbelled arch is not an arch at all in the structural sense: each course projects beyond the one below, like steps turned upside down, and the whole stands by cantilever and counterweight. It exerts no thrust, and cannot span far.
Build an arch of wedge-shaped stones (voussoirs) whose joints all point towards the centre of the curve: each stone can then fall only by forcing its neighbours apart, and so the ring holds itself up once the last stone, the keystone, is in place.
joints ⟂ intrados (radial to the centre)
An arch pushes outward on its supports as well as down. For the same load and span the horizontal push grows as the rise falls: halve the rise and you roughly double the thrust.
H ≈ w·s² ⁄ 8f (uniform load w per metre, span s, rise f)
A chain hanging freely takes the one shape in which it is in pure tension; turn that shape upside down and it is the shape of an arch in pure compression for the same loads.
free-hanging chain (catenary) ↔ ideal arch under its own weight
Trace the path of the resultant force through the stones from crown to foundations. If a line can be found that stays everywhere within the masonry, the arch will stand; where it touches an edge, a hinge will open, and four hinges make it collapse.
Draw a pointed arch from two centres on the springing line. With the centres at the springings, the arch is equilateral; with centres beyond them, a lancet; with centres between them, a drop arch. Late Gothic added arches of four centres and the reversed curve of the ogee.
r = s (equilateral) · r > s (lancet) · s⁄2 < r < s (drop)
A round arch must rise half its span, so arches of different spans on one springing line have crowns at different heights. A pointed arch can be given any rise at least half its span, so arches of different widths can all be made to reach the same height.
round: f = s⁄2 (fixed) · pointed: r = (s²⁄4 + f²) ⁄ s for any f ≥ s⁄2
Cite this page Chris Paton, “An arch is named by its curve”, The Textbook of Architecture, https://textbookofarchitecture.com/rule/arch-names. Text, drawings and models licensed under CC BY-NC 4.0.