The Tuscan column

An arch pushes outward on its supports as well as down. For the same load and span the horizontal push grows as the rise falls: halve the rise and you roughly double the thrust.

H ≈ w·s² ⁄ 8f (uniform load w per metre, span s, rise f)

To find how thick the pier of an arch must be, divide the intrados into three equal parts; draw a line from the springing through the first division, and produce it beyond the springing by its own length. A vertical through the end of that line marks the outer face of the pier.

pier ≈ ¼ span (semicircle) · ≈ 0.23 span (equilateral) · less for a lancet

Make the corner columns thicker than the rest by a fiftieth of their diameter, because, seen against the open sky, they look thinner than they are.

D corner = D × (1 + 1⁄50); Parthenon: 1.95 m against 1.905 m

Divide the height from floor to ceiling into three and a half parts and give two and a half to the opening; make a Doric door five and a half twelfths as wide as it is high (an Ionic one two-fifths), and narrow it slightly at the top.

h = 2½⁄3½ H; Doric w = 5½⁄12 h, Ionic w = h ÷ 2½; top narrowed by ⅓, ¼ or ⅛ of the jamb as h ≤ 16, ≤ 25, ≤ 30 ft

Architecture depends on order (ordinatio), arrangement (dispositio), eurythmy, symmetry, propriety (decor) and economy (distributio).

A column is narrower at the top than at the bottom, but the taller the column the less it should be diminished, because distance already makes its top look smaller.

upper Ø : lower Ø = 5⁄6 (≤15 ft) · 11⁄13 (15–20 ft) · 6⁄7 (20–30 ft) · 13⁄15 (30–40 ft) · 7⁄8 (40–50 ft)